In-Wall Tamper Resistant Smart Outlet, Z-Wave Plus

SKU: JAS14315

No Customer Review



In-Wall Tamper Resistant Smart Outlet, Z-Wave Plus

Add Z-Wave Control To A Plug-In Device

Enable Z-Wave remote control for any small plug-in appliance or lamp by replacing a standard power receptacle with the Jasco Z-Wave Plus Split Duplex Wall Receptacle, Tamper-Resistant (Gen5). The bottom outlet is Z-Wave controlled, and the top outlet is a pass-through “always on” outlet for other plug-in devices. The GE Z-Wave receptacle uses your existing wiring for easy installation (neutral wire required). As a tamper-resistant split duplex receptacle, this model also prevents insertion of foreign objects into the slots, providing built-in protection that is superior to conventional protection plates or outlet caps.

  • One “always on” outlet, one Z-Wave controlled outlet
  • Compatible with incandescent, LED, xenon, halogen, fluorescent and CFL bulbs
  • Control the Z-Wave outlet via remote or local button
  • “Z-Wave Plus” certified for wide compatibility
  • Tamper-resistance protects children
  • Blue LED indicates outlet location in a dark room

The Z-Wave controlled outlet supports plug-in incandescent lamps up to 960 Watts, or loads up to 1/2 HP or 1800W/15A resistive. The entire GE Z-Wave receptacle (both outlets) can handle a total load up to 1800W/15A.

Z-Wave Plus Certification

Z-Wave Plus

Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the “Next Gen” Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.

NOTE: This GE Z-Wave receptacle requires a Z-Wave network controller. Neutral wire required. Wallplate sold separately.

  • Manufacturer Part #: 14315
  • Color: White
  • Power: 120 VAC, 60 Hz
  • Signal (Frequency): 908.42 MHz (U.S.)
  • Protocol: Z-Wave Plus
  • Total max load for both outlets: 1800W (15A), Resistive load
  • Max load for Z-Wave controlled outlet: 960W incandescent, 1/2 HP Motor, or 1800W (15A) Resistive
  • Wireless Range: Up to 150 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
  • Operating Temperature Range: 32° to 104°F (0° to 40°C)
  • Environmental: For indoor use only.
  • Wire Gauge Requirements: Use 14 AWG or larger wires suitable for at least 80°C for supplying connections.
  • Approvals: FCC, IC
  • Warranty: 2 Years

Customer reviews

Write a review

There are no reviews yet.