The T6 Pro Z-Wave Programmable Thermostat is a Z-Wave Plus certified thermostat capable of controlling up to three heat and two cool stages of heat pump

It also measures, displays and reports % indoor relative humidity; however, this model does not control humidification equipment.

Because the thermostat is battery-powered, low-voltage integrators can easily connect the thermostat to most HVAC systems. Optional 24 VAC powering via “C” or common wire is also available, if desired.

Product Includes:

• T6 PRO Z-Wave Thermostat
• UWP™ Mounting System
• Honeywell Standard Installation Adapter (J-box adapter)
• Honeywell Decorative Cover Plate – Small; Size 4-49/64 in = 121mm.
• Screws and anchors
• 3 AA batteries
• Professional Install Guide
• Getting Started Guide

Specifications:

• Dimensions: 4.09″ H x 4.09″ W x 1.06″ D
• Heat Temperature Range: 40°F to 90°F (4.5°C to 32°C)
• Cool Temperature Range: 50°F to 99°F (10°C to 37°C)
• Operating Ambient Temperature Range: 37°F to 102°F (2.78°C to 38.89°C)
• Operating Relative Humidity: 5&per; to 90&per; (non-condensing)
• Temperature Sensor Accuracy: Thermostat ±1.5°F (0.85°C at 21.0°C)
• Regulations: FCC § 15.19 (a)(3), IC RSS-GEN, FCC Warning (Part 15.21) (USA only), FCC – 47 CFR § 15.105 (b)
• Warranty: 5-year limited
• Z-Wave Radio:
  Frequency (USA and Canada): 908.42 MHz
  Certified: Z-Wave Plus
  Generic Device Type: Thermostat
  Node type (C-wire): Always On Slave (AOS)
  Node type (Battery): Listening Sleeping Slave (LSS)
  Z-Wave Chipset: ZM5202AU
• Supported Z-Wave Command Classes:
  Z-Wave Plus Info V2
  Supervision V1
  Transport Service V2
  Association V2
  Version V2
  Association Group Information V2
  Basic V1
  Battery V1
  Clock V1
  Configuration V4
  Device Reset Local V1
  Manufacturer Specific V2
  Sensor Multilevel V5
  Notification V3
  Powerlevel V1
  Security 2 V1
  Thermostat Fan Mode V3
  Thermostat Fan State V1
  Thermostat Mode V3
  Thermostat Operating State V1
  Thermostat Setpoint V2