Z-Wave Plus On/Off Toggle Switch

Replace any existing in-wall switch with the Jasco Z-Wave Plus On/Off Wall Toggle Switch (Gen5, U.S.). This Z-Wave Plus enabled toggle-style switch enables Z-Wave remote control and local On/Off control for wired loads. The switch provides On/Off control for incandescents up to 960W, motor loads up to 1/2HP, or resistive loads up to 1800W. It can also be included in multiple automation groups or scenes when controlled by a master switch.

• Z-Wave Plus toggle switch delivers remote and local On/Off control
• Works with incandescents, motor loads, or resistive loads
• Can be included in multiple groups or scenes
• Compatible with single-pole or multi-pole (3-way or 4-way) applications
• Supports advanced configuration via Z-Wave Configuration command class
• Indicator light helps locating the switch in the dark

Z-Wave Plus Certification

Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the “Next Gen” Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.

Installation Details

The Z-Wave Smart Switch is suitable for single-pole or multi-pole configuration. Up to three Jasco Add-on Switches (sold separately) can be used in conjunction with this switch.

The switch requires standard screw terminal installation with wiring connections for Line (Hot), Load, Neutral, and Ground. Multi-pole installation also requires a traveler wire. The Smart Switch can be installed into single, dual, and triple gang boxes.

NOTE: Wallplate not included. For indoor use only.

• Manufacturer Part #: 14319
• Power: 120 VAC, 60 Hz
• Signal (Frequency): Z-Wave 908.42 MHz (U.S.)
• Load Ratings:
  • Incandescent: Min. Load – 40W; Max. Load – 960W
  • Motor: 1/2HP
  • Resistive: 1800W
• Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
• Environmental Conditions: For indoor use only
• Operating Temperature Range: 32° to 104° F (0° to 40° C)
• Approvals: UL/cUL Listed. Complies with FCC and Industry Canada regulations.