Control A Dimmable Plug-In Module With Z-Wave

Add Z-Wave control to a dimmable plug-in module with the Jasco Z-Wave Plus Plug-In Smart Dimmer Module, Single Outlet (Gen5). This simple plug-in module allows you to turn on/off and dim the plugged-in light through your Z-Wave controller. You can also control the lamp with its traditional local switch or using the button on the module.

The module supports a dimmable incandescent light up to 300 Watts, or a dimmable LED/CFL up to 100 Watts. To set it up, just plug your light into the module’s 2-prong outlet, and plug the module into a wall power outlet. Thanks to the module’s horizontal design, it doesn’t cover up other outlets.

• Works with dimmable incandescent, CFL, and LED lights
• Control the Z-Wave outlet via remote or local button
• Button glows blue when light is switched on
• “Z-Wave Plus” certified for wide compatibility
• Horizontal configuration prevents blocking of nearby outlets

Z-Wave Plus Certification

Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the “Next Gen” Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.

NOTE: Requires a Z-Wave network controller. Does not have a secondary pass-through outlet.

• Manufacturer Part #: 28166
• Power: 120VAC, 60Hz
• Signal (Frequency): 908.42 MHz (U.S.)
• Protocol: Z-Wave Plus
• Maximum load for the Z-Wave controlled outlet: 2.5A; 300W Incandescent or 100W Dimmable CFL/LED. Z-Wave controlled outlet is fused @ 5A. This fuse is not user serviceable.
• Wireless Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
• Operating Temperature Range: 32° to 104°F (0° to 40°C)
• Environmental: For indoor use only.
• Approvals: FCC, IC, Z-Wave Plus

This device supports lifeline (association group 1). This Z-Wave device has advanced features that allow you to customize your experience. These features can only be adjusted by a Z-Wave enabled controller that supports the Z-Wave Configuration command class. For a complete list of Adjustable