Add Z-Wave Control To Your Plug-In Device

Use your Z-Wave controller to turn on/off a plug-in lamp or small appliance with the Jasco Z-Wave Plus Plug-In Smart Switch Module, Single Outlet (Gen5). This simple plug-in module allows you to turn on/off the plugged-in device through your Z-Wave controller. You can also control the device with its traditional local switch or using the button on the module.

The module supports an incandescent light up to 600 Watts (5A), or a load up to 1/2 HP or 1800W/15A resistive. To set it up, just plug your device into the module’s 3-prong outlet, and plug the module into a wall power outlet. Thanks to the module’s horizontal design, it doesn’t cover up other outlets.

• Works with incandescent lamps up to 600W
• Supports loads up to 1/2 HP or 1800W/15A resistive
• Control the Z-Wave outlet via remote or local button
• Button glows blue when light is switched on
• “Z-Wave Plus” certified for wide compatibility
• Horizontal configuration prevents blocking of nearby outlets

Z-Wave Plus Certification

Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the “Next Gen” Z-Wave hardware platform, also known as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.

NOTE: Requires a Z-Wave network controller. Does not have a secondary pass-through outlet.

• Manufacturer Part #: 28168
• Power: 120VAC, 60Hz
• Signal (Frequency): 908.42 MHz (U.S.)
• Protocol: Z-Wave Plus
• Maximum load for the Z-Wave controlled outlet: 600W (5A) Incandescent, 1/2 HP Motor or 1800W (15A) Resistive
• Wireless Range: Up to 132 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
• Operating Temperature Range: 32° to 104°F (0° to 40°C)
• Environmental: For indoor use only.
• Approvals: FCC, IC, Z-Wave Plus

This Z-Wave device has advanced features that allow you to customize your experience. These features can only be adjusted by a Z-Wave enabled controller that supports the Z-Wave Configuration command class.